Aeroflex MG350 Model · in TIM Gel (Two Part)
Aeroflex MG350 is a thermally conductive liquid gap filling material, two-component, cured either at room or elevated…
Specification
| PROPERTIES | UNIT | MG350 | col1 |
|---|---|---|---|
| - | - | A | B |
| Appearance | - | White | Blue |
| The Mixing Ratio | - | 1:1 | — |
| Viscosity | cps | 150000 | — |
| Viscosity After Mixing | cps | 150000 | — |
| Minimum Use Thickness | mm | 0.05 | — |
| Operating Time@25°C | min | 60 | — |
| Curing Time(90%) | min @100℃ | 30 | — |
| h @25℃ | 15 | — | — |
| Hardness | Shore OO | 35 | — |
| Thermal Conductivity | W/m·K | 3.6 | — |
| Thermal Resistance @50psi | °C·in²/W | ≤0.06 | — |
| Dielectric Strength (@1MM) | kV | ≥10 | — |
| Volume Resistivity | Ω·cm | ≥1.0X10 12 | — |
| Density | g/cm³ | 3.0 | — |
| Dielectric Constant | @1MHz | 7.0 | — |
| Small Molecule Cyclosiloxane (D4-D20) | ppm | ≤50 | — |
| CTE (Coefficient Thermal Expansion) | ppm/°C | - | — |
| Flammability Rating | UL. 94 | V-0 | — |
| Continuous Use Temperature | °C | -60~+200 | — |
| RoHS Compliant | - | YES | — |
About the model
Aeroflex MG350 is a thermally conductive liquid gap filling material, two-component, cured either at room or elevated temperature. Prior to curing, the material maintains good thixotropic characteristics, and is easy to dispense. The result is a soft, form-in-place elastomer ideal for combining fragile components with high topography and / or stack-up tolerances to general heat sink or housing. After curing, it won't pump from the interface as a result of thermal cycling and is dry to the touch.
Product Description
Typical Property Data